Custom hem tags
Order custom hem tags for t-shirts, hoodies, dresses and sleeve hems
Trusted by






Custom hem tags and labels
A hem tag is a small fabric label sewn into the hem or the lower side seam of a garment, where it carries your brand without sitting against the neck. Super Label Store weaves custom hem tags from 5 pieces per design, starting at $45, in any size from 0.4 x 0.4 in (10 x 10 mm) upward, with a free 1:1 proof you can print and hold against the garment before you order.
Hem tags and hem labels are the same product under two names. Both are woven on a jacquard loom from colored polyester yarn, so the design is part of the fabric rather than printed on top of it, and both outlast the garment they are sewn into.
Where a hem tag sits, and why brands choose it
The hem is the second most used placement after the neck, and it is chosen for a specific reason: it is visible while the garment is worn. A neck label is read once, at the point of purchase. A hem tag sits at the bottom edge of a t-shirt, a hoodie or a dress and stays in view every time someone looks at the piece.
Four placements fall under the same construction, and they take slightly different sizes:
- Bottom hem. Sewn into the folded hem at the front or the side, usually 0.5 x 1.5 in (13 x 38 mm) to 0.75 x 2 in (19 x 51 mm). The most common hem tag order.
- Side seam at hip height. The classic streetwear placement, same size range, where the tag catches the eye without interrupting the front of the garment.
- Sleeve hem. Sleeve hem tags sit at the cuff of a long sleeve or the edge of a short sleeve. Keep these at the smaller end, around 0.5 x 1.5 in (13 x 38 mm), because the cuff curves.
- Shirt hem. On a woven shirt the hem tag usually goes on the side split, where the fabric is flat and the tag lies without pulling.
In short: a hem tag works anywhere along the lower edge of a garment, at roughly 0.5 x 1.5 in (13 x 38 mm) to 0.75 x 2 in (19 x 51 mm), with the smaller end of that range for sleeve hems.
Why Super Label Store?
Super Easy
Super Quality
Super Fast
Free Digital Proof
Hem tag size: start from the seam, not the logo
- Standard hem tag: 0.5 x 1.5 in (13 x 38 mm) to 0.75 x 2 in (19 x 51 mm)
- Sleeve hem tag: 0.4 x 1.2 in (10 x 30 mm) to 0.5 x 1.5 in (13 x 38 mm)
- Wide hem tag with a wordmark and a second line: 0.75 x 2.5 in (19 x 64 mm)
Fold styles for the hem
- Manhattan Fold. Both short ends folded under and the label folded in half, so the tag reads from both sides. This is the standard for hems and side seams, because a hem tag is often seen from the back as well as the front.
- End Fold. Both short ends folded under, label lies flat against the garment. Choose this when the tag is stitched flat along the hem and only one side shows.
- Center Fold. Folded once in the middle with both ends open, stitched in at the open ends. Common where the tag is tucked into the seam itself.
- Straight Cut. A flat label cut on all four sides, stitched on all sides onto the surface. Used when the hem tag is a visible design element rather than a seam detail.
Hem tag design: what survives at this size
- One element, not three. A wordmark, or an icon, or a short line of text. At 0.5 in (13 mm) in height, a logo plus a tagline plus a founding year becomes unreadable.
- Bold sans-serif reads best. Serif faces and thin lettering lose their fine strokes in thread at hem tag scale.
- Up to 8 colors in a single design. Solid thread colors, so design flat from the start and the woven result matches what you approved.
- Strong contrast between thread and background. Close shades that separate clearly on screen can merge once they are woven at this size.
- Think horizontally. A hem tag is wide and short, so a design that runs along the length works better than one built around a tall shape.
Other products
Materials and construction
- Damask is the standard for brand labels. The tight weave carries fine detail at small sizes, which matters more on a hem tag than anywhere else in the garment.
- Satin has a glossy face and the softest hand of the three, chosen where the tag sits against skin.
- Cotton has a natural matte look and a softer drape, which suits handmade and heritage pieces where the tag should read as part of the garment.
Sewn in or ironed on
- Sew-on. The most durable option, and the right answer for a hem that gets handled and washed.
- Iron-on. A heat-activated backing that bonds without stitching, useful for short runs and samples.
- Combination. An iron-on backing you can stitch as well, so the tag holds its position while you sew.
Ordering custom hem tags
- Minimum order: 5 pieces per design
- Order steps: 5, 25, 50, 100 and up to 100,000+
- Price: from $45 for 5 hem tags
- Size range: 0.4 x 0.4 in (10 x 10 mm) to 11.8 x 11.8 in (300 x 300 mm)
- Colors: up to 8 per design
- Standard production: 8 to 12 business days plus shipping
- Rush production: 4 to 8 business days plus shipping
- Proof: free Digital Proof as a PDF at scale 1:1, before you order
- Free shipping on orders over $200
Who orders hem tags
- Streetwear and fashion brands using the hem tag as the visible mark on a tee or a hoodie, where the neck label stays hidden
- Shirtmakers placing a tag on the side split of a woven shirt
- Activewear and loungewear brands who need a mark that survives sweat, stretch and frequent washing
- Makers and small labels ordering 5 or 25 pieces to finish a first run rather than committing to a thousand
- Dressmakers and occasion wear using a hem tag in linings and skirt hems as part of the finish



