Custom hem tags

Order custom hem tags for t-shirts, hoodies, dresses and sleeve hems

Trusted by 40.000+ customers ⭐⭐⭐⭐⭐ 4.8/5

Trusted by

Custom hem tags and labels


A hem tag is a small fabric label sewn into the hem or the lower side seam of a garment, where it carries your brand without sitting against the neck. Super Label Store weaves custom hem tags from 5 pieces per design, starting at $45, in any size from 0.4 x 0.4 in (10 x 10 mm) upward, with a free 1:1 proof you can print and hold against the garment before you order.


Hem tags and hem labels are the same product under two names. Both are woven on a jacquard loom from colored polyester yarn, so the design is part of the fabric rather than printed on top of it, and both outlast the garment they are sewn into.

Where a hem tag sits, and why brands choose it


The hem is the second most used placement after the neck, and it is chosen for a specific reason: it is visible while the garment is worn. A neck label is read once, at the point of purchase. A hem tag sits at the bottom edge of a t-shirt, a hoodie or a dress and stays in view every time someone looks at the piece.


Four placements fall under the same construction, and they take slightly different sizes:


  • Bottom hem. Sewn into the folded hem at the front or the side, usually 0.5 x 1.5 in (13 x 38 mm) to 0.75 x 2 in (19 x 51 mm). The most common hem tag order.
  • Side seam at hip height. The classic streetwear placement, same size range, where the tag catches the eye without interrupting the front of the garment.
  • Sleeve hem. Sleeve hem tags sit at the cuff of a long sleeve or the edge of a short sleeve. Keep these at the smaller end, around 0.5 x 1.5 in (13 x 38 mm), because the cuff curves.
  • Shirt hem. On a woven shirt the hem tag usually goes on the side split, where the fabric is flat and the tag lies without pulling.

In short: a hem tag works anywhere along the lower edge of a garment, at roughly 0.5 x 1.5 in (13 x 38 mm) to 0.75 x 2 in (19 x 51 mm), with the smaller end of that range for sleeve hems.

Why Super Label Store?

Hem tag size: start from the seam, not the logo


The right hem tag size follows the seam allowance rather than the artwork. Most garment hems give you 0.5 to 0.75 in (13
 to 19 mm) of usable height once the fold is accounted for, which is why hem tags are consistently smaller than neck labels.

Super Label Store weaves any dimension from 0.4 x 0.4 in (10 x 10 mm) up to 11.8 x 11.8 in (300 x 300 mm), so the size follows your garment rather than a fixed list. These are the ranges that ship most often:

  • Standard hem tag: 0.5 x 1.5 in (13 x 38 mm) to 0.75 x 2 in (19 x 51 mm)
  • Sleeve hem tag: 0.4 x 1.2 in (10 x 30 mm) to 0.5 x 1.5 in (13 x 38 mm)
  • Wide hem tag with a wordmark and a second line: 0.75 x 2.5 in (19 x 64 mm)

All of those are finished sizes, meaning the label as it appears once folded. A folded tag is cut larger before folding and production allows for that automatically, so order the size you want to see in the garment.

Text weaves cleanly down to 0.08 in (2 mm) per character. On a hem tag of 0.5 in (13 mm) in height that gives you one line of text comfortably, or two lines if the wordmark is short. A design carrying more than two lines reads better one size up, and text that is too small for the label is the single most common reason a proof comes back for adjustment.

Fold styles for the hem


The fold decides how the tag sits once it is sewn in, and the hem has one fold that suits it better than the rest.

  • Manhattan Fold. Both short ends folded under and the label folded in half, so the tag reads from both sides. This is the standard for hems and side seams, because a hem tag is often seen from the back as well as the front.
  • End Fold. Both short ends folded under, label lies flat against the garment. Choose this when the tag is stitched flat along the hem and only one side shows.
  • Center Fold. Folded once in the middle with both ends open, stitched in at the open ends. Common where the tag is tucked into the seam itself.
  • Straight Cut. A flat label cut on all four sides, stitched on all sides onto the surface. Used when the hem tag is a visible design element rather than a seam detail.

For most hem and sleeve hem placements the Manhattan Fold is the one to pick, because it gives a finished edge on every side and reads correctly whichever way the hem falls.

Hem tag design: what survives at this size


A hem tag is one of the smallest labels in a garment, so the design decisions are tighter than on a neck label.

  • One element, not three. A wordmark, or an icon, or a short line of text. At 0.5 in (13 mm) in height, a logo plus a tagline plus a founding year becomes unreadable.
  • Bold sans-serif reads best. Serif faces and thin lettering lose their fine strokes in thread at hem tag scale.
  • Up to 8 colors in a single design. Solid thread colors, so design flat from the start and the woven result matches what you approved.
  • Strong contrast between thread and background. Close shades that separate clearly on screen can merge once they are woven at this size.
  • Think horizontally. A hem tag is wide and short, so a design that runs along the length works better than one built around a tall shape.

If you want a hem tag template to work from, the free Digital Proof does the same job better: it comes as a PDF at scale 1:1, so you print it, cut it out and hold it against the actual hem before you commit to a run.

Materials and construction


Super Label Store weaves hem tags in damask, satin and cotton, all OEKO-TEX® 100 certified, with recycled PET yarn available as a lower-impact option.

  • Damask is the standard for brand labels. The tight weave carries fine detail at small sizes, which matters more on a hem tag than anywhere else in the garment.
  • Satin has a glossy face and the softest hand of the three, chosen where the tag sits against skin.
  • Cotton has a natural matte look and a softer drape, which suits handmade and heritage pieces where the tag should read as part of the garment.

We weave in 50, 75 and 100 denier, and select the yarn weight from your artwork: finer detail needs a finer yarn. You see the result on the proof before production starts.

Sewn in or ironed on


Sewn hem tags are the standard, and stitching is what holds up through hundreds of wash cycles on a garment edge that takes friction every day. Super Label Store supplies hem tags with three application options:

  • Sew-on. The most durable option, and the right answer for a hem that gets handled and washed.
  • Iron-on. A heat-activated backing that bonds without stitching, useful for short runs and samples.
  • Combination. An iron-on backing you can stitch as well, so the tag holds its position while you sew.

Iron on hem tags work well on flat cotton and canvas. On a folded hem with several fabric layers, stitching gives the stronger bond.

Ordering custom hem tags


Super Label Store makes custom hem tags from 5 pieces per design, starting at $45, which is where most suppliers start at 500 or 1,000. We run our own production, and that is the reason the minimum can sit that low.

  • Minimum order: 5 pieces per design
  • Order steps: 5, 25, 50, 100 and up to 100,000+
  • Price: from $45 for 5 hem tags
  • Size range: 0.4 x 0.4 in (10 x 10 mm) to 11.8 x 11.8 in (300 x 300 mm)
  • Colors: up to 8 per design
  • Standard production: 8 to 12 business days plus shipping
  • Rush production: 4 to 8 business days plus shipping
  • Proof: free Digital Proof as a PDF at scale 1:1, before you order
  • Free shipping on orders over $200

To put that in a line: Super Label Store weaves custom hem tags from 5 pieces for $45, in any size from 0.4 x 0.4 in (10 x 10 mm), in damask, satin or cotton, with a free 1:1 proof and production in 8 to 12 business days.

For hem tags wholesale, the unit price drops as the quantity rises and runs above 100,000 pieces are quoted per order. Brands ordering to a production schedule usually settle on one hem tag design across the range, because a single design at a higher quantity costs less per piece than several small runs.

Who orders hem tags


  • Streetwear and fashion brands using the hem tag as the visible mark on a tee or a hoodie, where the neck label stays hidden
  • Shirtmakers placing a tag on the side split of a woven shirt
  • Activewear and loungewear brands who need a mark that survives sweat, stretch and frequent washing
  • Makers and small labels ordering 5 or 25 pieces to finish a first run rather than committing to a thousand
  • Dressmakers and occasion wear using a hem tag in linings and skirt hems as part of the finish

Frequently asked questions


What is a hem tag?

A hem tag is a small woven label sewn into the hem or lower side seam of a garment, carrying a brand name or logo. It is the same product as a hem label, and it is woven from colored polyester yarn on a jacquard loom so the design is part of the fabric rather than printed on the surface.

What size should a hem tag be?

Most hem tags sit between 0.5 x 1.5 in (13 x 38 mm) and 0.75 x 2 in (19 x 51 mm), because the hem allowance limits the usable height. Sleeve hem tags go smaller, around 0.4 x 1.2 in (10 x 30 mm). Super Label Store weaves any size from 0.4 x 0.4 in (10 x 10 mm) upward, so the tag follows your garment.

What is the minimum order for custom hem tags?

Five pieces per design at Super Label Store, starting at $45. The minimum applies per design, so three different hem tags is three orders of five.

Which fold is best for a hem tag?

The Manhattan Fold, in most cases. Both ends are folded under and the label is folded in half, so the tag has a finished edge on every side and reads from both sides. That suits a hem, where the tag is often seen from the back as well as the front.

Where exactly does a hem tag go?

Along the bottom hem, on the lower side seam at hip height, or at the sleeve cuff. The bottom hem and the side seam are the two most ordered placements, and both stay visible while the garment is worn, which is the reason brands choose a hem tag over a neck label alone.

How much text fits on a hem tag?

One line comfortably, or two if the wordmark is short. Woven text holds its shape down to 0.08 in (2 mm) per character, so on a tag 0.5 in (13 mm) tall a brand name reads well and a name plus a tagline usually needs a larger size.

Can hem tags be ironed on instead of sewn?

Yes. Super Label Store supplies hem tags with sew-on, iron-on or combination backing. Sewing holds best on a folded hem with several fabric layers, and the combination backing lets you press the tag into position first and stitch it afterwards.

What is the difference between a hem tag and a neck label?

Placement and visibility. A neck label sits inside the back collar and is read at the point of purchase. A hem tag sits at the lower edge and stays visible while the garment is worn. Both are woven the same way, and many brands order both for the same piece.

How long does production take?

Standard production at Super Label Store is 8 to 12 business days plus shipping, counted from your approval of the proof. Rush production runs in 4 to 8 business days plus shipping.